When renovating the kitchen, we first think of the design and layout, followed by the selection and promotion of countertops, sinks and gas stoves one by one. In fact, the functionality, ease of use and design of the kitchen faucet are also one of the kitchen items that people care about.
The operation method of kitchen (hot water mixing method) faucet has double handle (double valve) mixing faucet and single lever mixing faucet. In addition, in addition to the conventional handle steering wheel, the method of water discharge/stop can also be operated by buttons (hand or foot switch, etc.), and there are also kitchen faucets that automatically turn on and off through sensors, etc.
Some kitchen faucets also add functions such as hand showers and water purification. Due to the characteristics of use, many gooseneck-shaped (curve like gooseneck) faucets can also be seen in the design. And according to the installation method, there are wall-mounted, sitting (countertop and sink) and other installation types.
Types and characteristics of kitchen faucets
1. Single handle mixing faucet
Hot and cold water is discharged, operated with a handle for water stop, which can adjust the amount and temperature of hot water on the left and right sides of the operation type. It is widely used in the kitchen because it can be operated with one hand and is easy to use. There are many prices and variations, and most monolithic kitchens also use the single-lever faucet as a standard.
2. Double handle (faucet) mixing faucet
The water volume and temperature can be adjusted by two handles for hot and cold water supply. It can also be seen in imported goods such as individual designs.
3. Mixing faucet with hand shower
The faucet that can be pulled out from the front and can be hand-held shower is a type that is widely used today. The water flow of the hand shower can reach any corner during cleaning, which is convenient to use.
4. Water purification special faucet/integrated faucet
In addition to the usual faucet functions, there are also special faucets for water purifiers. Install a filter element (water purification filter) under the counter, a type of faucet with a built-in water purification filter element, etc. In addition, there is a mixer tap unit with integrated water purification.
5. Automatic faucet non-touch faucet
The non-contact faucet can stop the drainage without touching the faucet body. There is a sensor under the position of the spout, which detects the approach of hands and dishes, thereby controlling the discharge of water, and the faucet automatically stops when it leaves. There is also a type, just put your hand on the sensor on the top of the faucet to sense the water, and stop the water when you repeat the action.
Smart sensor faucets in both cases, the accuracy of the sensors has now improved, and the number of easy-to-use products is gradually entering more homes. Since there is no need to operate the handle, the water flow can be controlled even when both hands are occupied. During cooking and cleaning, it is also very good to avoid oil or foam on the hands from sticking to the sewage faucet. It is a very popular hygienic type. Faucet.
6. Touch switch type (touch switch type) faucet
The switch at the top controls the drain type faucet. Touch with the hand or the back of the wrist, it is easy to operate even when both hands are occupied and can be stopped at any time.
A condition in which the handle gets dirty with your hands during cooking. This kind of touch is OK only through the palm, fingers, and back of the hand. Since it can often stop water with one click, it is excellent in water saving.
7. Special faucet for Nakajima sink
The high-throw gooseneck faucet used on the party-style island sink is mainly decorative and design, and it is a model for many domestic western kitchens and European and American kitchens.
Various designs for energy saving
Today's kitchen faucets in the family are more and more inclined to water-saving performance from the original design. For example, the single-lever hot and cold water mixing faucet and the automatic induction faucet are easier to stop the water operation, thereby saving more water. In addition, the consumption of water flow can also be reduced by specifying the size of the water flow and the shape of the shower.
1. Water saving hydrant: avoid unintentional waste of hot water
The hot water saving hydrant refers to the hydrant that reduces the primary energy consumption by reducing the usage of hot water. The water faucet, the water faucet of the small flow water spouting structure and the water faucet of the first cold water structure are mainly used. The highlight is that both flow regulation and temperature regulation are within the user's operating range.
When the normal faucet handle is in the middle position, it often represents mixed water, and when it is opened normally, a water heater ignition operation occurs, and the heat-saving water hydrant device is to give priority to the cold water mechanism when you are unconscious to prevent the water heater from running. Mixing The point is in the previous position, which means that there is only cold water, which can avoid the waste of energy (gas or electricity, etc.) of the water heater.
In addition, the single-lever design can effectively control the water volume. The ECO-type valve core has two water control devices, which will not cause waste by opening the water to the maximum at one time.
Soup-saving A1: Water-stop structure at hand, 9% savings on desktop faucets
Soup-saving B1: Priority spitting cold water structure, 9% saving on table faucets
Soup-saving AB: ECO-type handle water-saving structure, table faucet 24% saving
2. Foam outlet design
By injecting air into the water, the volume of the water particles is increased, thus achieving the desired water saving effect.
Generally, the foam type water outlet adopts two or more kinds of extremely fine shower holes, which evenly distributes each drop of water and is more delicate, so that the washed dirt is easier to fall off, and the hand feels good, and it is easier to produce soap and other types of foam, which can be comfortably use.
3. sensor faucet
Just put your hand on the upper sensor to turn on/off the water. In the power saving mode, the sensor detects the time when the tableware and hand are placed under the faucet mouth to control the effective water output.
Regarding the faucets below, there are usually certified water-saving water faucets with environmental protection marks.
Considering ease of use and maintenance
Because the kitchen faucet is an item used every day, the water-saving type can be considered as much as possible when choosing. In addition to matching the style of the overall cabinet, we also consider its ease of use and ease of care, as well as the size of the sink and the placement of the faucet. How to be convenient between cooking and washing things and more. In the case of an open kitchen, not only the kitchen, but also the view of the faucet from the dining room and living room should be taken into consideration. So you might as well choose the style and installation of the faucet while choosing the overall cabinet.
Depending on sink size and location
1. Long handle pull-out design
The hand-held shower head can be pulled out and held in your hand, and you can easily wash the sink or items with one hand. The top usually has a water outlet switch. [Shower head pull-out size: about 30cm (water purifier integrated about 27cm)]
2. The water spouting space of the faucet
Types and characteristics of kitchen sinks and how to choose this article mentioned in this article that a large single sink can put pots and the like in the sink. Generally, the diameter of the pot is about 20~30cm. When choosing a faucet, choose a longer one. The handle of the faucet (25~30cm) can make the water outlet extend in the center of the sink or pot to increase the water spouting space, so that large pots and pans can be easily cleaned and used.
In addition, the high-throw faucet design can also avoid friction or collision with the pot or utensil itself when receiving water.
3. Condition of the moving line
The space of the kitchen needs to be adjusted according to the personal working style and house type, and the position of the sink and the stove should be adjusted. Usually, the cooking and processing area should ensure a space of more than 80cm, and the standard installation position of the faucet is located on the side close to the stove.
4, oily hands do not need to touch
The design of the switch handle of the faucet should not only be beautiful and coordinated, but also be convenient for the user to open and close. For the design of the long-handled switch that is cooking or full of oily soap, it can be switched with the back of the hand in special circumstances. This reduces the number of jobs to clean the faucet itself.
5. Electroplated metal handle
The handle of the kitchen faucet and its body are usually electroplated. Because of the excellent electroplating technology, it is convenient to clean the faucet and care. Of course, for the metal material, it brings an uncomfortable cold feeling to the elderly, so in the kitchen for the elderly, the resin-type handle is not only lighter to use, but also can feel comfortable care.
Whether domestic or imported, faucets are constantly improving
As part of the space design, the kitchen is closely related to living and dining. From aesthetics and humanization is also a place that many people pay more and more attention to. The development trend of faucets is generally towards clean and simple development. There are also many faucets with unique designs. Depending on the artistry and ornamental, choose your favorite according to your own needs.
